Safeguard Your Garage Flooring from Harm Using the Appropriate Covering
Regardless of if you utilize your garage only for vehicle storage or as a workshop, it is essential to safeguard the concrete flooring from degradation. When left uncoated, garage flooring can rapidly break down from things like oil and chemical leaks, tire marks, and general use and tear. Among the best ways to protect and enhance a garage floor is through applying an epoxy or polyaspartic covering.
Garage Force is a renowned brand that manufactures high-quality protective coatings specifically formulated for garage flooring. After assessing dozens of Garage Force reviews found on the internet, a few products stood apart as top performers for shielding and enhancing the appearance of any garage flooring:
The Garage Force Epoxy Protective Layer Kit is a two-component 100% solids epoxy system that offers a durable, chemical-resistant, and aesthetically-pleasing finish. The low-odor epoxy dries rapidly to form a hard, glossy surface that resists stains, abrasions, and impacts. It’s suitable for both residential and commercial uses. Installation is straightforward with the kit’s step-by-step instructions.
For faster-drying protection, consider the Garage Force Polyaspartic Coating. This single-component protective layer cures within 2-4 hours, allowing you to use your garage sooner than with traditional epoxy. It also offers superior UV resistance and color retention compared to other polyaspartic garage floor coating on the market. The non-yellowing formula maintains a bright, glossy look for years.
Whichever protective layer you opt for, proper surface preparation is key for long-lasting outcomes. Sweep and vacuum to remove all loose debris. Then etch or grind the concrete to generate texture for better adhesion. This is particularly significant for older flooring with existing protective layers or sealants. After etching, thoroughly clean the floor to remove all residue and allow it to fully dry before application.
For application, both the Garage Force epoxy and polyaspartic protective layers include detailed directions. Generally, you’ll want to pour the resin element onto the flooring in ribbons and spread it uniformly with a notched squeegee. Back-roll the material with a non-shedding roller to work it into all the pores and crevices of the concrete.
Be sure to apply the Garage Force garage floor coating within the appropriate temperature range, usually between 50-90F. Too cold or hot and it won’t cure properly. Also work in sections you can coat within the pot life window before material starts to set up. An extra set of hands makes application go much smoother. Allow full cures times of 12-24 hours before moving vehicles or equipment back in.
With the right Garage Force garage floor coating on your floor, you’ll enjoy a glossy, stain-resistant surface that’s easy to clean. No more unsightly oil spots or tire imprints marring the concrete. The non-slip texture provides traction too. Periodic sweeping is usually all that’s needed to maintain the like-new look for many years. Recoat only when the protective coating wears thin rather than stripping and starting over.